After-sales Service: | 24 Hours Online |
---|---|
Type: | Steel Plate |
Standard: | ASTM, AISI, GB, JIS, DIN, BS |
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Product Name | Tinplate |
Standard | GB, JIS, ASTM, EN, ISO, etc. |
Tin Coating Weight | Equal weight tin plating, differential weight tin plating |
Surface State | Bright surface, stone surface, silvery surface, matt surface |
Thickness | 0.18-0.55 mm |
Width | 750- 1200 mm or as required |
Length | 500- 1168 mm or as required |
Raw Strip Type | MR, L, D |
Hardness | T-2, T-2.5, T-3, T-3.5, T-4, T-5 |
Application | Food packaging, electronic appliances, building materials, etc |
Raw Strip Type | Characteristics |
MR | The content of non-metallic inclusion is similar to L steel, the limitation of residual elements content is not as strict as L steel, and it has good corrosion resistance, suitable for most purposes. |
L | The content of non-metallic inclusion and residual elements of Cu, Ni, Cr, Mo are low, used for applications of high requirements in corrosion resistance. |
D | Used for deep drawing or preventing stretch mark purposes. |
Code | Type | Characteristics |
B | Bright Surface | Tin plating on smooth surface with stone pattern, then reflow the tin layer to obtain the bright surface. |
R | Stone Surface | Tin plating on surface with a certain direction of the stone pattern, then reflow the tin layer to obtain the bright surface. |
S | Silvery Surface | Tin plating on rough and mattsurface, then reflow the tin layer to obtain the bright surface. |
M | Matt Surface | Tin plating on matt surfacewithout reflowing. |
Remark | Temper Grade | Typical Application | |||
JIS G3303 | ASTM A623M | EN10202 | |||
ASTM A624M | |||||
ASTM A625M | |||||
ASTM A626M | |||||
ASTM A650M | |||||
Single Reduced(SR) | T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter. | |
T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, | ||
end for large can. | |||||
T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | ||
T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | ||
T-3.5 | T59 | TS290 | General use, pail, 18L, 4L | ||
T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures. | ||
Body and end for small can. | |||||
T-5 | T65 | TH435 | Can ends and bodies requiring intensity. | ||
Body and end for small can. | |||||
Double Reduced(DR) | DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies | |
DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | ||
DR-8M | T73 | TH580 | |||
DR-9 | T75 | TH620 | DRD bodies, Lug cap & 3 piece bodies | ||
DR-9M | T76 | - | Thinner guage body, end, DRD cans, caps. | ||
DR-10 | - | - | DRD bodies, Lug cap & 3 piece bodies | ||
Thinner guage body, end, DRD cans, caps. |
Jiangsu Ruilaibo Special Steel Co., Ltd, situated in Wuxi, Jiangsu, is a premier enterprise in China, specializing in high-end carbon steel, tinplate, galvanized steel, and stainless steel materials. Our core products encompass cold-rolled steel (including full hard, low carbon, high-strength phosphor, bake-hardening, flux-cored wire, carbon structural, and high-strength cold-rolled steel), as well as tinplate, hot-dip galvanized steel, and stainless steel products.
Primarily exported to Southeast Asia, North Africa, and the Middle East, we bring years of expertise in serving global enterprises and organizations. This allows us to fulfill any order in the shortest time frame, ensuring all products meet technical standards and offer exceptional cost performance.Q: What are your terms of payment?
A: We require a 30% TT payment in advance, with the balance paid before loading.
Q: Can you provide samples?
A: Yes, we are pleased to offer samples for quality inspection.
Q: How do you ensure the quality of your products?
A: Our products are manufactured in strict conformity with national and international standards, and we conduct thorough testing before dispatch. If you need to review our quality certifications and various testing reports, please feel free to request them from us.
Q: What is the lead time for samples and mass production?
A: Typically, it takes 3-5 days for ready molds, 15-20 days for new molds and samples post-confirmation, and 25-30 days for mass production.