| After-sales Service: | 24 Hours Online |
|---|---|
| Type: | Steel Plate |
| Standard: | ASTM, AISI, GB, JIS, DIN, BS |
|
Still deciding? Get samples of US$ 100/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Product Name | Tinplate |
| Standard | GB, JIS, ASTM, EN, ISO, etc. |
| Tin Coating Weight | Equal weight tin plating, differential weight tin plating |
| Surface State | Bright surface, stone surface, silvery surface, matt surface |
| Thickness | 0.18-0.55 mm |
| Width | 750- 1200 mm or as required |
| Length | 500- 1168 mm or as required |
| Raw Strip Type | MR, L, D |
| Hardness | T-2, T-2.5, T-3, T-3.5, T-4, T-5 |
| Application | Food packaging, electronic appliances, building materials, etc |
| Raw Strip Type | Characteristics |
| MR | The content of non-metallic inclusion is similar to L steel, the limitation of residual elements content is not as strict as L steel, and it has good corrosion resistance, suitable for most purposes. |
| L | The content of non-metallic inclusion and residual elements of Cu, Ni, Cr, Mo are low, used for applications of high requirements in corrosion resistance. |
| D | Used for deep drawing or preventing stretch mark purposes. |
| Code | Type | Characteristics |
| B | Bright Surface | Tin plating on smooth surface with stone pattern, then reflow the tin layer to obtain the bright surface. |
| R | Stone Surface | Tin plating on surface with a certain direction of the stone pattern, then reflow the tin layer to obtain the bright surface. |
| S | Silvery Surface | Tin plating on rough and mattsurface, then reflow the tin layer to obtain the bright surface. |
| M | Matt Surface | Tin plating on matt surfacewithout reflowing. |
| Remark | Temper Grade | Typical Application | |||
| JIS G3303 | ASTM A623M | EN10202 | |||
| ASTM A624M | |||||
| ASTM A625M | |||||
| ASTM A626M | |||||
| ASTM A650M | |||||
| Single Reduced(SR) | T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter. | |
| T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, | ||
| end for large can. | |||||
| T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | ||
| T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | ||
| T-3.5 | T59 | TS290 | General use, pail, 18L, 4L | ||
| T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures. | ||
| Body and end for small can. | |||||
| T-5 | T65 | TH435 | Can ends and bodies requiring intensity. | ||
| Body and end for small can. | |||||
| Double Reduced(DR) | DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies | |
| DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | ||
| DR-8M | T73 | TH580 | |||
| DR-9 | T75 | TH620 | DRD bodies, Lug cap & 3 piece bodies | ||
| DR-9M | T76 | - | Thinner guage body, end, DRD cans, caps. | ||
| DR-10 | - | - | DRD bodies, Lug cap & 3 piece bodies | ||
| Thinner guage body, end, DRD cans, caps. | |||||
Jiangsu Ruilaibo Special Steel Co., Ltd is strategically located in Wuxi, Jiangsu. We are a leading enterprise in the high-end support service sector, specializing in carbon steel, tinplate, galvanized steel, and stainless steel materials. Our extensive product range includes cold-rolled steel products (such as full hard products, low carbon steels, high-strength phosphor steels, bake hardening steels, flux-cored wire steel, carbon structural steels, and high-strength cold-rolled steel), tinplate products, hot-dip galvanized steel products, and stainless steel products.
Mainly exported to Southeast Asia, North Africa, and the Middle East, we have extensive experience in supplying enterprises and organizations in the international market. Our efficiency enables us to fulfill orders in the shortest time possible while ensuring that all products meet technical requirements and offer ideal cost performance.
Q: What are your terms of payment?
A: We require a 30% TT payment in advance, with the balance paid before loading.
Q: Could you provide a sample?
A: Yes, we are honored to offer samples for your quality check.
Q: How is the quality of your products?
A: Our products are manufactured strictly according to national and international standards. We conduct rigorous tests before delivery. Should you wish to see our quality certifications and various testing reports, please do not hesitate to ask.
Q: How long does it take for samples and mass production?
A: Typically, it takes 3-5 days for ready molds, 15-20 days for new molds and samples after confirmation, and 25-30 days for mass production.
){kind=link}